Navigator K2 keypad
4
color LED’s behind the keypad’s “OFF” button. The color of these LED’s can
also be changed manually by issuing a command within a macro.
• Relay Control output. The Navigator K2 can be connected to a speaker relay
module (Sonance part number 91550) for muting individual rooms or zones.
This can also be used to control other relay controlled products.
• Keypad sync bus. Individual K2 keypads can be tied together so that the
display, power status, and mute status changes on all keypads when a
change occurs on any one of them. In other words, each of the K2 keypads
that are tied together will track the changes made to any of the other
keypads.
• A serial port for communication with the Navigator K2 Manager
programming software.
• Non-volatile flash memory. The Navigator K2 will not lose any programmed
data when the power is removed.
• Easy installation. The K2 fits inside many standard double-gang electrical
boxes for installation in new construction. It also has a self-contained
mounting system for retrofit applications.
• Five-year parts and labor warranty.
IMPORTANT NOTES
Please read these important notes about the Navigator K2:
• The Navigator K2 should be placed in an area where it is around normal room
temperature (between 60°F to 90°F). If the temperature is too hot, the display
appears dim. If the temperature is too cold, the display appears dark and
may respond slowly.
• Do not use sharp objects on the touchscreen. It is designed to operate with a
touch of your finger.
• Do not let the Navigator K2 get wet. It should not be handled with wet hands
or be placed in an area where it could get wet.
• Do not subject the Navigator K2 to smoke, dust, or vibrations. The display
may be damaged from excessive shock or vibration.
• Use only a power supply that is provided by Sonance. Using the wrong type
of power supply may result in product failure or other damage.
To Next Page
Loading...
