Chapter 5 • Navigator K2 Manager Advanced Features
59
1. Choose System Configuration Report from the File menu.
2. Click the Print command button.
3. Click OK.
To copy the Configuration Report of the open remote file to the Windows clipboard:
1. Choose System Configuration Report from the File menu.
2. Click the Copy command button.
3. The System Configuration Report is now on the Windows clipboard.
4. Click OK.
HOW TO CHECK MEMORY USAGE
It is possible, though not likely, to create a file in Navigator K2 Manager with more
information than the Navigator K2 can hold. To make sure this does not happen, use
the Check Memory Usage command on the Edit menu to see how large the current
file is.
The Device Memory Used dialog displays the amount of space that buttons,
bitmaps, custom buttons, commands, and macros take up in the Navigator K2
keypad’s 192KB of memory. The pie chart in the dialog represents the amount of
memory that each of the object types uses.
If the memory is more than 100% full, the Free line will show a negative number
and will be flashing red. In this case, the following warning will be displayed:
You will have to delete enough objects so that the Free line is not flashing red before
you can send this file to the Navigator K2.
HOW TO CREATE A “SELF-DOWNLOADING .EXE”
This command creates an executable from the current file that will automatically
download itself to the remote when run. These executables can be distributed to
client sites to simplify the process of updating keypads in the field.
To Next Page
Loading...
