Chapter 4 • Navigator K2 Manager Basics
25
HOW TO SETUP COMMUNICATIONS
The Communications Setup dialog box is for setting up communications between
the Navigator K2 and your PC.
To open the Communications Setup dialog box:
Choose Set COM Port from the Options menu.
Com Port group box - Choose the COM Port that the Navigator K2 is connected
to.
Auto Detect - Click this button to have Navigator K2 Manager attempt to
automatically locate the correct COM port. The Navigator K2 must be connected
to the computer using the programming cable.
Maximum Com Speed - Choose a lower speed from this list if you are having
problems communicating with the Navigator K2 keypad. The default is High.
To Next Page
Loading...
