Navigator K2 keypad
20
HOW TO ADD COMMANDS TO BUTTONS
IR commands are indicated by a small red box with the letter ‘C’ in the upper right
corner of buttons they have been assigned to.
1. Select the Infrared Tab from the Library Browser.
2. Click the Select New Remote button in the Infrared Library window to
select a different remote than displayed.
Remotes are listed by manufacturer, type, and model in the Select Remote from
Library window; use this to select the remote you would like to assign codes from.
Remotes that have already been used in the current remote file will be moved to the
top of the list and their icon will turn red for easy identification.
To Next Page
Loading...
