Navigator K2 keypad
6
THE TOUCHSCREEN DISPLAY
The Navigator K2 touchscreen display is organized as a series of pages and frames. A
page can consist of up to 12 frames of information having one frame displayed on
the screen at a time.
Normally each frame on a page contains objects (buttons, text, graphics, and
symbols) that are related in some way. For instance, they may all display
information necessary for controlling a particular DVD player.
By default, the Navigator K2 has one Main Menu page. This is the first page that is
displayed when power is applied to the K2. It is programmed at the factory to
display a sample page with a graphic of the Sonance logo on it.
A page is normally created for each device or system to be controlled. Each of these
pages is then attached to one of the “hard” source buttons on the K2. Also, any page
can contain a button(s) that will display any other page when selected. The K2 will
support 63 pages plus the Main Menu page.
THE CONTROL PANEL PAGE
The Control Panel page can be displayed by pressing and holding both frame
arrows for at least 5 seconds.
You can also access the Control Panel page by assigning a “Control Panel” page link
to a button using the Navigator K2 Manager software.
The Control Panel consists of the following two frames:
To change frames, press the frame Left or frame Right buttons on the
bottom of the touchscreen. To return to your Navigator K2 program, press the OFF
button.
To Next Page
Loading...
