Sonance Navigator K2 - New Bitmap Size Dialog Box (Button Bitmap Editor Only)

Navigator K2 keypad
70
In most cases, you will find it easiest to create the Up image first. As a starting
point for creating the Down image, you may want to select the whole Up image,
copy it to the Clipboard, switch to the Down image, and paste the image from the
Clipboard.
At this point, you can use the editor to modify the image you pasted to make it the
Down image. If a simple reversal is all you need, the Invert Selection command on
the Edit menu will do the trick.
NEW BITMAP SIZE DIALOG BOX (Button Bitmap Editor Only):
The New Bitmap Size dialog box opens when you select the Create New Image
command. You can choose from the five sizes listed in the dialog box, a sample of
the size will be displayed in the Sample section.
26 by 10 pixels = 1 section wide by 1 section high, which is the smallest button
bitmap size.
26 by 26 pixels = 1 section wide by 2 sections high, which is the standard channel
icon size.
58 by 26 pixels = 2 sections wide by 2 sections high, which is one-third of the
touchscreen
58 by 42 pixels = 2 sections wide by 3 sections high, which is half of the
touchscreen.
58 by 58 pixels = 2 sections wide by 4 sections high, which is two-thirds of the
touchscreen.