Navigator K2 keypad
46
HOW TO EDIT THE DEVICE PROPERTIES
The Device Properties dialog box allows you to change settings that affect the
entire keypad. This is the same information that can be set directly on the keypad
through the Control Panel. Note that the keypad Control Panel settings are
overwritten in favor of the Device Property settings each time a new file is
loaded in to the keypad.
To open the Device Properties dialog box:
Choose Edit Device Properties from the Edit menu.
POWER TAB
The Power tab options are:
Power Down Time: This allows you to adjust the time the unit stays powered
up after the last button press. The time is variable from 1 second to 60 seconds
(default is 10 seconds). During power down mode, the Navigator K2 changes to
the power down backlight level.
Normal Backlight Level: This is the backlight brightness level that is used when
the Navigator K2 is in the power up mode (when it is awake). The options are
High, Medium, Low, and Off. Regardless of the backlight level, the display
remains on during this state.
Power Down Backlight Level: This is the backlight brightness level that is used
when the Navigator K2 is in the power down mode (when it is asleep). The
To Next Page
Loading...
