Sonance Navigator K2 - Up Image-Down Image Tool (Custom Button Editor Only)

Chapter 6 • Image Editors
69
Filled Rectangle Tool - The Filled Rectangle Tool is used to draw rectangles filled
with a Fill Pattern on the image. Several Fill Patterns are available in the rectangular
area below the drawing tools. To use the Filled Rectangle Tool, choose the desired
Fill Pattern, click the left mouse button in the Drawing Area where one corner of the
rectangle should be placed, drag the mouse to the opposite corner, and release the
mouse button. To draw a solid white rectangle, follow the same steps but click the
right mouse button instead of the left.
Filled Rounded Rectangle Tool - The Filled Rounded Rectangle Tool is used to
draw rectangles with rounded corners filled with a Fill Pattern on the image. Several
Fill Patterns are available in the rectangular area below the drawing tools. To use
the Filled Rounded Rectangle Tool, choose the desired Fill Pattern, click the left
mouse button in the Drawing Area where one corner of the rectangle should be
placed, drag the mouse to the opposite corner, and release the mouse button. To
draw a solid white rounded rectangle, follow the same steps but click the right
mouse button instead of the left.
Filled Circle Tool - The Filled Circle Tool is used to draw circles and ovals filled
with a Fill Pattern on the image. Several Fill Patterns are available in the rectangular
area below the drawing tools. To use the Filled Circle Tool, choose the desired Fill
Pattern, click the left mouse button in the Drawing Area where one corner of the
imaginary rectangle bounding the circle should be placed, drag the mouse to the
opposite corner, and release the mouse button. To draw a solid white circle, follow
the same steps but click the right mouse button instead of the left.
UP IMAGE-DOWN IMAGE TOOL (Custom Button Editor Only):
Click on the Up Image button to display the Up Image in the Drawing Area, or click
on the Down Image button to display the Down Image.
All Custom Buttons have two totally separate images, an Up image, which
represents the button in its normal state; and a Down image, which represents the
button in its pressed state. The Up image is the picture that is normally displayed
by the Navigator K2, unless the button has its Reversed property set, in which case
the Down image is normally displayed.