Chapter 4 • Navigator K2 Manager Basics
15
Chapter 4. Navigator K2 Manager Basics
The Navigator K2 keypad is divided into two sections: the touchscreen and the
“hard” buttons. You can assign commands, macros, and page links to any button
you create on the touchscreen or on the “hard” buttons.
The “hard” button functions of the Navigator K2 follows the pages, not the frames,
so all 12 frames of a page will have the same commands, macros, and page links on
the “hard” buttons. Each frame of the touchscreen can have buttons with different
commands, macros, and page links.
All of the “hard” buttons on the K2 can be programmed as Global buttons. When a
button is set to Global, its functions are common across all of the pages (i.e. it does
the same thing on every page).
PAGES
The individual screens on the Navigator K2 keypad are called pages. Pages on the
touchscreen can contain buttons, links to other pages, a title, text, commands, and
macros.
The page links, commands, and macros associated with the “hard” buttons on the
Navigator K2 are also stored with each page.
Each page can have up to 12 frames on the touchscreen and usually has the controls
for just one component. Each frame is accessed by scrolling left and right with the
arrows at the bottom of the Navigator K2 touchscreen. With Navigator K2 Manager,
you can add and delete pages, duplicate pages, etc.
All Navigator K2 pages have a page title. The page title is the name that appears in
the title bar above the touchscreen grid and in the Page List.
HOW TO ADD A PAGE
1. Click the Create New Page command on the Toolbar.
2. Enter a name for the page in the New Page Title dialog. This is usually
the name of the component, such as: CD, Satellite, Lights, and so on.
3. Click OK.
Repeat this procedure for each page you wish to add.
HOW TO DELETE A PAGE
1. Select the page to be deleted from the Page List.
To Next Page
Loading...
