Sonim XP6 IS User Manual

45
Managing Calls
can send quick response to the caller.
To view and edit quick responses, in the Call settings
screen, tap Quick responses, tap the specic response
message to edit. Edit the message and tap OK.
Managing Fixed Dial Numbers
FDN (xed dialing numbers) is a SIM card-enabled
feature. It restricts outgoing calls to phone numbers
which are not listed in the FDN list. This feature can be
activated only if PIN2 is entered. Contact your network
operator if you do not have a PIN2. Set up your phone
to place outgoing calls only to the xed dialing numbers
(FDN) that you save on the phone’s SIM card.
1. From Home or All Apps screen (
), tap on Phone
( ).
2. Tap Options > Settings.
3. Tap Fixed Dialing Numbers located under Other
Call Settings.
4. Tap Enable FDN, and then enter the PIN2 supplied
with the SIM card.
5. Changing PIN2 allows you to change the PIN2
number supplied with the SIM card.
6. Tap FDN list and add numbers.
Monitoring Incoming and Outgoing Calls
The Call screening options helps you to monitor and
regulate your incoming and outgoing calls.
Screening Outgoing Calls
1. In the Call Settings screen, enable Call Screening.
2. Tap on Call Screening and enable Screening
Outgoing calls to call only numbers stored in the
FDN list
Screening Incoming Calls
1. In the Call Settings screen, enable Call Screening.
2. Tap on Call Screening and enable Screening
Incoming Calls to receive or reject calls from
unknown numbers.
3. To block incoming calls from certain numbers, tap
Screening incoming call setting and select one of
the following options:
• Allow only contacts: Allows calls only from
numbers stored in the contacts.
• Block black list: Blocks calls from contacts
added to the black list.
• Allow white list: Allows calls from contacts
added to the white list.
Auto Retry
When this option is enabled, it prompts an option for
the user to redial the same number when a call is not
answered.
Turn on proximity sensor
You can save battery power by switching off the display
when you are in a call. Enable Turn on proximity sensor to
switch off the display, when you answer a call.
1. In the call settings screen, enable Turn on Proximity
sensor.

Sonim XP6 IS Specifications

General

Brand	Sonim
Model	XP6 IS
Category	Cell Phone
Language	English