The
image
does
not
appear
on
the
TV
screen.
• Check [Video output] to see if the video output signal
of
your camera is set
to the color system
of
your
TV
(page 105).
• Check whether the connection is correct (page 104).
Your
camera
cannot
delete
an
image.
• Cancel the protection (page 101).
You
have
deleted
an
image
by
mistake.
• Once you have deleted an image, you cannot restore it. We recommend that
you protect images that you do not want to delete (page 101).
You
cannot
mark
a
DPOF
mark.
• You cannot mark DPOF marks on RAW data files.
You
do
not
know
if
the
OS
of
your
computer
is
compatible
with
the
camera.
• Check "Recommended computer environment" (pages 119, 127).
Your
computer
does
not
recognize
your
camera.
• Check that the camera is turned on.
• When the battery level is low, install the charged battery pack (page 16), or
use the AC Adaptor/charger (not supplied).
• Use the USB cable (supplied) (page 120).
• Disconnect the USB cable, and connect it again firmly.
• Set [USB connection] to [Mass Storage] (page 120).
• Disconnect all equipment other than the camera, the keyboard and the
mouse from the USB jacks
of
your computer.
• Connect the camera directly to your computer without passing through a
USB hub or other device (page 119).
•
o
-
::::T
('D
-
~
147
The
image
does
not
appear
on
the
TV
screen.
• Check [Video output] to see if the video output signal
of
your camera is set
to the color system
of
your
TV
(page 105).
• Check whether the connection is correct (page 104).
Your
camera
cannot
delete
an
image.
• Cancel the protection (page 101).
You
have
deleted
an
image
by
mistake.
• Once you have deleted an image, you cannot restore it. We recommend that
you protect images that you do not want to delete (page 101).
You
cannot
mark
a
DPOF
mark.
• You cannot mark DPOF marks on RAW data files.
You
do
not
know
if
the
OS
of
your
computer
is
compatible
with
the
camera.
• Check "Recommended computer environment" (pages 119, 127).
Your
computer
does
not
recognize
your
camera.
• Check that the camera is turned on.
• When the battery level is low, install the charged battery pack (page 16), or
use the AC Adaptor/charger (not supplied).
• Use the USB cable (supplied) (page 120).
• Disconnect the USB cable, and connect it again firmly.
• Set [USB connection] to [Mass Storage] (page 120).
• Disconnect all equipment other than the camera, the keyboard and the
mouse from the USB jacks
of
your computer.
• Connect the camera directly to your computer without passing through a
USB hub or other device (page 119).
•
o
-
::::T
('D
-
~
147
To Next Page
Loading...
