"Memory
Stick
PRO
Duo"
is
not
recognized
by
a
computer
with
a
"Memory
Stick"
slot.
•
If
"Memory Stick PRO Duo" is not supported on your computer's
"Memory Stick" slot, connect the camera to the computer (page 120). The
computer recognizes the "Memory Stick PRO Duo."
Also see
"PictBridge
compliant
printer"
(as follows)
in
conjunction
with
the following items.
The
color
of
the
image
is
strange.
• When you print the images recorded in Adobe ROB mode using sROB
printers that are not compatible with Adobe ROB (DCF2.0/Exif2.21), the
images are printed at a lower intensity level (page 88).
Images
are
printed
with
both
edges
cut
off.
• Depending on your printer, the left, right, top, and bottom edges
of
the
image may be cut off. Especially when you print an image shot with the
aspect ratio set to [16:9], the lateral end
of
the image may be cut off.
• When printing images using your own printer, cancel the trimming or
borderless settings. Consult the printer manufacturer as to whether the
printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whether
they can print the images without cutting
off
both edges.
Cannot
print
images
with
the
date.
• Using "Picture Motion Browser," you can print images with date
(page 130).
• This camera does not have a feature for superimposing dates on images.
However, because the images shot with the camera include information on
the
recording date,
you
can
print
images
with
the
date
superimposed if
the
printer or the software can recognize
Exif
information. For compatibility
with Exif information, consult the manufacturer
of
the printer or the
software.
• When you print images at a shop, images can be printed with the date
if
you
ask them to do so.
•
c
-
::::r
CD
-
tn
149
"Memory
Stick
PRO
Duo"
is
not
recognized
by
a
computer
with
a
"Memory
Stick"
slot.
•
If
"Memory Stick PRO Duo" is not supported on your computer's
"Memory Stick" slot, connect the camera to the computer (page 120). The
computer recognizes the "Memory Stick PRO Duo."
Also see
"PictBridge
compliant
printer"
(as follows)
in
conjunction
with
the following items.
The
color
of
the
image
is
strange.
• When you print the images recorded in Adobe ROB mode using sROB
printers that are not compatible with Adobe ROB (DCF2.0/Exif2.21), the
images are printed at a lower intensity level (page 88).
Images
are
printed
with
both
edges
cut
off.
• Depending on your printer, the left, right, top, and bottom edges
of
the
image may be cut off. Especially when you print an image shot with the
aspect ratio set to [16:9], the lateral end
of
the image may be cut off.
• When printing images using your own printer, cancel the trimming or
borderless settings. Consult the printer manufacturer as to whether the
printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whether
they can print the images without cutting
off
both edges.
Cannot
print
images
with
the
date.
• Using "Picture Motion Browser," you can print images with date
(page 130).
• This camera does not have a feature for superimposing dates on images.
However, because the images shot with the camera include information on
the
recording date,
you
can
print
images
with
the
date
superimposed if
the
printer or the software can recognize
Exif
information. For compatibility
with Exif information, consult the manufacturer
of
the printer or the
software.
• When you print images at a shop, images can be printed with the date
if
you
ask them to do so.
•
c
-
::::r
CD
-
tn
149
To Next Page
Loading...
