To
remove
the
lens
1
Press
the
lens
release
button
all
the
way
in
and
turn
the
lens
counterclockwise
until
it
stops.
• When changing the lens, quickly
change the lens away from dusty
locations so as to keep dust from
getting inside the camera.
2
Replace
the
cap
on
the
lens
and
attach
the
body
cap
to
the
camera.
• Before you attach the cap, remove dust
from the cap.
Lens
release
button
Note
on
changing
the
lens
When changing the lens,
if
dust or debris gets inside the camera and lands
on the surface
of
the ilnage sensor (the part that acts
as
the film), it may
appear on the image, depending on the shooting environment.
The camera is equipped with
an
anti-dust function to prevent dust from
landing on the image sensor. However, quickly change the lens away from
dusty locations when attaching/removing a lens.
If
dust
or
debris
lands
on
the
image
sensor
Clean the image sensor using [Cleaning mode] in the
~
Setup menu
(page 32).
20
To
remove
the
lens
1
Press
the
lens
release
button
all
the
way
in
and
turn
the
lens
counterclockwise
until
it
stops.
• When changing the lens, quickly
change the lens away from dusty
locations so as to keep dust from
getting inside the camera.
2
Replace
the
cap
on
the
lens
and
attach
the
body
cap
to
the
camera.
• Before you attach the cap, remove dust
from the cap.
Lens
release
button
Note
on
changing
the
lens
When changing the lens,
if
dust or debris gets inside the camera and lands
on the surface
of
the ilnage sensor (the part that acts
as
the film), it may
appear on the image, depending on the shooting environment.
The camera is equipped with
an
anti-dust function to prevent dust from
landing on the image sensor. However, quickly change the lens away from
dusty locations when attaching/removing a lens.
If
dust
or
debris
lands
on
the
image
sensor
Clean the image sensor using [Cleaning mode] in the
~
Setup menu
(page 32).
20
To Next Page
Loading...
