1
Carefully
slide
the
eyecup
off
by
pushing
on
each
side
of
the
eyecup.
2
Slide
the
eyepiece
cover
over
the
viewfinder.
Note
• The eyepiece sensors located below the viewfinder may be activated depending on
the situation, and the focus may be adjusted or the LCD monitor may continue to
flash. In such cases, set [Eye-Start AF] (page 69) and [Auto
off
wi VF] (page 115) to
[Off].
28
1
Carefully
slide
the
eyecup
off
by
pushing
on
each
side
of
the
eyecup.
2
Slide
the
eyepiece
cover
over
the
viewfinder.
Note
• The eyepiece sensors located below the viewfinder may be activated depending on
the situation, and the focus may be adjusted or the LCD monitor may continue to
flash. In such cases, set [Eye-Start AF] (page 69) and [Auto
off
wi VF] (page 115) to
[Off].
28