EasyManua.ls Logo

Sony a200 - Page 4

Sony a200
203 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- Never block the slots and openings by
placing the set on a bed, sofa, rug, or
other similar surface.
- Never place the set in a confined space,
such as a bookcase, or built-in cabinet,
unless proper ventilation
is
provided.
- Do not place the set near or over a
radiator or heat register, or where it
is
exposed to direct sunlight.
lightning
For added protection for this set during a
lightning storm, or when it is left
unattended and unused for long periods
of
time, unplug
it
from the wall outlet and
disconnect the antenna or cable system.
This will prevent damage to the set due to
lightning and power-line surges.
Damage
Requiring
Service
Unplug the set from the wall outlet and
refer servicing to qualified service
personnel under the following conditions:
- When the power cord or plug
is
damaged
or frayed.
- If liquid has been spilled or objects have
fallen into the set.
-
If
the set has been exposed to rain or
water.
- If the set has been subject to excessive
shock by being dropped, or the cabinet
has been damaged.
-
If
the set does not operate normally when
following the operating instructions.
Adjust only those controls that are
specified
in
the
operating
instructions.
Improper adjustment
of
other controls
may result
in
damage and will often
require extensive work by a qualified
technician to restore the set to normal
operation.
- When the set exhibits a distinct change in
performance - this indicates a need for
serVIce.
Servicing
Do not attempt to service the set yourself as
opening or removing covers may expose
you to dangerous voltage or other hazards.
4
Refer all servicing to qualified service
personnel.
Replacement
parts
When replacement parts are required, be
sure the service technician has used
replacement parts specified by the
manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in
fire, electric shock, or other hazards.
Safety
Check
Upon completion
of
any service or repairs
to the set, ask the service technician to
perform routine safety checks (as specified
f>y
the manufacturer) to determine that the
set
is
in safe operating condition.
- Never block the slots and openings by
placing the set on a bed, sofa, rug, or
other similar surface.
- Never place the set in a confined space,
such as a bookcase, or built-in cabinet,
unless proper ventilation
is
provided.
- Do not place the set near or over a
radiator or heat register, or where it
is
exposed to direct sunlight.
lightning
For added protection for this set during a
lightning storm, or when it is left
unattended and unused for long periods
of
time, unplug
it
from the wall outlet and
disconnect the antenna or cable system.
This will prevent damage to the set due to
lightning and power-line surges.
Damage
Requiring
Service
Unplug the set from the wall outlet and
refer servicing to qualified service
personnel under the following conditions:
- When the power cord or plug
is
damaged
or frayed.
- If liquid has been spilled or objects have
fallen into the set.
-
If
the set has been exposed to rain or
water.
- If the set has been subject to excessive
shock by being dropped, or the cabinet
has been damaged.
-
If
the set does not operate normally when
following the operating instructions.
Adjust only those controls that are
specified
in
the
operating
instructions.
Improper adjustment
of
other controls
may result
in
damage and will often
require extensive work by a qualified
technician to restore the set to normal
operation.
- When the set exhibits a distinct change in
performance - this indicates a need for
serVIce.
Servicing
Do not attempt to service the set yourself as
opening or removing covers may expose
you to dangerous voltage or other hazards.
4
Refer all servicing to qualified service
personnel.
Replacement
parts
When replacement parts are required, be
sure the service technician has used
replacement parts specified by the
manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in
fire, electric shock, or other hazards.
Safety
Check
Upon completion
of
any service or repairs
to the set, ask the service technician to
perform routine safety checks (as specified
f>y
the manufacturer) to determine that the
set
is
in safe operating condition.

Table of Contents

Related product manuals