Shooting
techniques
• Adjust the compensation level by checking the recorded image.
• Using bracket shooting, you can shoot multiple images with the exposure
shifted to the plus or minus sides (page 90).
When
shooting with the flash, you can adjust the amount
of
flash light
alone, without changing the exposure compensation. You can only change
the exposure
of
a main subject which is within the flash range.
MENU
button
-+
101
1
-+
[Flash
compens.l
-+
Select
the
desired
setting
• Toward
+:
Makes the flash level higher.
Toward
-:
Makes the flash level lower.
•
c:
en
:::::s
CCI
Notes
ET
CD
tt
If
you have adjusted the flash level,
31
appears in the viewfinder when the built-in
en
:::::s"
flash is pulled up.
When
you adjust it, be careful not to forget to reset the value. 0
o
•
The
positive effect may not be visible due to the limited amount
of
flash light,
if
the
~
:::::s
subject is at
or
around the
maximum
range for the flash.
If
the subject is very close,
CCI
-
the negative effect may not be visible. §
n
-
_.
Exposure
compensation
and
lIash
compensation
Exposure compensation changes the shutter speed, aperture, and ISO sensitivity (when
[AUTO] is selected) to perform the compensation.
If
the flash is used, the amount
of
flash light is also changed.
However, flash compensation only changes the amount
of
flash light.
MENU
button
-+
101
1
-+
[Flash
control]
-+
Select
the
desired
setting
o
:::::s
79
Shooting
techniques
• Adjust the compensation level by checking the recorded image.
• Using bracket shooting, you can shoot multiple images with the exposure
shifted to the plus or minus sides (page 90).
When
shooting with the flash, you can adjust the amount
of
flash light
alone, without changing the exposure compensation. You can only change
the exposure
of
a main subject which is within the flash range.
MENU
button
-+
101
1
-+
[Flash
compens.l
-+
Select
the
desired
setting
• Toward
+:
Makes the flash level higher.
Toward
-:
Makes the flash level lower.
•
c:
en
:::::s
CCI
Notes
ET
CD
tt
If
you have adjusted the flash level,
31
appears in the viewfinder when the built-in
en
:::::s"
flash is pulled up.
When
you adjust it, be careful not to forget to reset the value. 0
o
•
The
positive effect may not be visible due to the limited amount
of
flash light,
if
the
~
:::::s
subject is at
or
around the
maximum
range for the flash.
If
the subject is very close,
CCI
-
the negative effect may not be visible. §
n
-
_.
Exposure
compensation
and
lIash
compensation
Exposure compensation changes the shutter speed, aperture, and ISO sensitivity (when
[AUTO] is selected) to perform the compensation.
If
the flash is used, the amount
of
flash light is also changed.
However, flash compensation only changes the amount
of
flash light.
MENU
button
-+
101
1
-+
[Flash
control]
-+
Select
the
desired
setting
o
:::::s
79
To Next Page
Loading...
