Sony a200 - Page 86

Note
• The message "Custom WB error" indicates that the value is beyond the expected
range. (When the flash
is used on a subject in close proximity or a subject with a
bright color is
in the frame.) If you register this value, the b., • ..d indicator turns yellow
on the recording information display on the LCD monitor. You can shoot at this
point, but it
is recommended that you set the white balance again to get a more
correct white balance value.
To call the custom white balance setting
Fn button --+ [White balance] --+ ~Ll (Custom)
Note
• If the flash is used when the shutter button is pressed, a custom white balance is
registered with the flash light taken into account. Take pictures with the flash in later
shootings.
86
Note
• The message "Custom WB error" indicates that the value is beyond the expected
range. (When the flash
is used on a subject in close proximity or a subject with a
bright color is
in the frame.) If you register this value, the b., • ..d indicator turns yellow
on the recording information display on the LCD monitor. You can shoot at this
point, but it
is recommended that you set the white balance again to get a more
correct white balance value.
To call the custom white balance setting
Fn button --+ [White balance] --+ ~Ll (Custom)
Note
• If the flash is used when the shutter button is pressed, a custom white balance is
registered with the flash light taken into account. Take pictures with the flash in later
shootings.
86