Sony BVM-14F5U - Guidance for Basic Monitor Operations; Operations Overview Table

13
The following table shows how to use a control panel,
connectors and menus to perform basic monitor
operations.
Guidance for Basic Monitor Operations
Operations Control panel and connectors Menus
Selecting signals to be monitored Specify the channel number with 0 to 9
buttons of the numeric keypad.
1 to 90: channel numbers for external
input signals
91 to 95: channel numbers for signals
from the internal test signal generator
91: PLUGE (Picture Line UP Generating
Equipment)
92: 20% gray signal
93: 100% white signal
94: five-step gray scale
95: crosshatch
• INPUT CONFIGURATION menu
(see
page 32)
• SYSTEM CONFIGURATION menu
(see page 43)
Remote control • REMOTE 1 connector
• REMOTE 2 connector
See page 12 for details.
• REMOTE menu (see page 38)
• ADDRESS menu (see page 59)
Adjusting the screen and signals • Function buttons
See page 9 for details.
• MANUAL adjustment buttons and
knobs
See page 8 for details.
• CONTROL PRESET ADJ menu (see
page 22)
• COLOR TEMP ADJ menu (see page
25)
• ALIGNMENT menu (see page 48)
• ON SCREEN SET menu (see page 45)
• KEY PROTECT menu (see page 15)
Data transfer • REMOTE 1 connector
See page 12 for details.
• Monitor memory card
See page 14 for details.
• MEMORY CARD menu (see page 54)
• COPY menu (see page 56)
Menu operations • Menu operation buttons
See page 8 for details.
• ADDRESS button of the function
buttons
See page 9 for details.
• Basic menu operations (see page 15)
• PASSWORD menu (see page 41)