33
Structure and Usage of the INPUT CONFIGURATION Menu
This section explains the setting lists displayed in the
menu.
How to read the setting lists
•For purposes of explanation, each setting list is
preceded by a 3-digit number. These numbers are not
displayed on the screen.
•Setting lists are indented to indicate their position in
the tree structure of the menu. (When list YYY is
found under list XXX, it is indented to the right of
list XXX.)
•The arrow mark (÷) refers you to another setting
list that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, you can make the
setting using a single list.
Select SET UP from the main menu list.
CONTROL PRESET ADJ...
COLOR TEMP ADJ...
SET UP... ÷ 300
MEMORY CARD...
COPY...
STATUS...
MAINTENANCE...
KEY PROTECT OFF
Menu list
300 SET UP menu list: Choose the menu for setting the desired items.
INPUT CONFIGURATION menu: Set the input signal configuration ÷ 301
REMOTE menu
PASSWORD menu
SYSTEM CONFIGURATION menu
ON SCREEN SET menu
ALIGNMENT menu
EXTEND MENU
To Next Page
Loading...
