Sony BVM-14F5U - Page 22

18
2 Press the ENTER button.
The SCREEN MODE setting list is displayed.


  
  SCREEN MODE    
4:3-NORM      
4:3-UNDR 
16:9-NORM    
16:9-UNDR    




p
SCREEN MODE setting list
3 By pressing either UP and DOWN buttons, move
the cursor to 16:9 - NORM.


  
  SCREEN MODE    
4:3-NORM      
4:3-UNDR 
16:9-NORM    
16:9-UNDR    




p
4 Press the ENTER button.
The display returns to the INPUT
CONFIGURATION menu, and shows SCREEN
MODE as the 16:9 - NORM setting.
APERTURE OFF
APERTURE VALUE     100
10 CH  
INPUT CONFIGURATION ↓
FORM AT...     NTSC-7 .5
SLOTNO2
INPUTNO1
YCSEP...3LINES COMB
SYNC MODE    INT
SCREEN MODE...16:9-NORM
SAFE AREA    OFF
SAFE AREA SCALE...  80%
p
Entering a Numerical Value
Example: changing the APERTURE VALUE setting
in the INPUT CONFIGURATION menu to 85
The numeric keypad, UP and DOWN buttons, or
PHASE knob can be used to enter numerical values.
1 Move the cursor to the APERTURE VALUE line
in the INPUT CONFIGURATION menu.
APERTURE OFF
APERTURE VALUE     100
10 CH  
INPUT CONFIGURATION ↓
FORM AT...     NTSC-7 .5
SLOTNO2
INPUTNO1
YCSEP...3LINES COMB
SYNC MODE    INT
SCREEN MODE... 4:3-NORM
SAFE AREA    OFF
SAFE AREA SCALE...  80%
p
INPUT CONFIGURATION menu
2 Press the ENTER button.
All characters in the selected line are displayed in
yellow, indicating that it can now be modified.
3 There are three ways to set the value:
• Using the numeric keypad, enter “8” and “5”, and
press the ENTER button.
• Press the DOWN button to change the value to
“85”.
• Turn the PHASE knob counterclockwise to
change the value to “85”.
4 Press the ENTER button.
The APERTURE VALUE is set to 85. (The value
is again displayed in white text.)
APERTURE OFF
APERTURE VALUE     085
10 CH  
INPUT CONFIGURATION ↓
FORM AT...     NTSC-7 .5
SLOTNO2
INPUTNO1
YCSEP...3LINES COMB
SYNC MODE    INT
SCREEN MODE... 4:3-NORM
SAFE AREA    OFF
SAFE AREA SCALE...  80%
p
Basic Menu Operations