24
Preset Adjustment of the Picture Level Control Knobs — CONTROL
PRESET ADJ Menu
137 FILE NAME (PRESET/xxCH): Choose either PRESET or CH SET.
÷ Copy is carried out.
PRESET: Copy common data.
CH SET: Copy data set for another channel. Input the number of the channel from
which the data will be copied.
When the input channel number is deleted with the Del button. the number “1”
appears instead. Restore the previous setting by pressing the MENU button, then re-
enter the channel number. (Setting with the UP/DOWN buttons or PHASE knob is
possible without pressing the MENU button.)
To Next Page
Loading...
