43-GB
Preparation for Network Operation
(6) Tap [DNS2].
The character input screen appears.
,
Tips
•This entry may be unnecessary, depending on your provider.
For details, consult your provider.
•This “DNS2” is sometimes referred to as the “secondary DNS server”, etc.
(7) Enter DNS2.
For details of how to input characters, see “How to input characters” (p. 9).
(8) Tap [Enter].
The Custom : DNS Server Setup screen appears again.
,
(9) Tap [Exit].
The Provider Setup : Custom screen appears again.
(10)Follow steps 4 to 9 on pages 37 to 38 for setting [Mail] and [Browser]
preferences.
Note
The Mail preference screen and the Browser screen are shared by Dial-up Setup
and LAN Setup. You cannot set these two preferences at the same time.
For a more detailed setup, go to “Setting other preferences” (p. 44).
Setting the network preferences
To Next Page
Loading...
