Preread Editing
3-18 Editing
Chapter 3 Editing
1 Set the monitor output switch to
“PB”.
2 On Video Setting Page 1/2 of the
Sub LCD menu, set
“PREREAD” to “ON”.
3 Make the necessary connections
for the preread editing.
4 Execute the preread editing after
selecting the desired insert
editing.
For details of executing insert
editing, see 3-1-2 “Insert
Editing”.
5 After preread editing, break the
connections used for the preread
editing.
6 On Video Setting Page 1/2 of the
Sub LCD menu, set
“PREREAD” to “OFF”.
7 Make sure that no loop
connection remains.
• When using an external switcher, set
setup menu item 727 (page 6-31) to
EXT.
• Some switchers cannot be used due
to their delay time. For details,
consult Sony service personnel.
To Next Page
Loading...
