Sony EV-S7000 - Recording TV programs using VCR Plus+ (continued)

Notes
¢ If the & tape indicator in
the VCR's display window
and the TIMER indicator on
the VCR flash when the VCR
turns off, check for one of the
following causes:
- no tape has been inserted,
- the tape is at its end, or
- the safety tab on the
cassette has been slid to
show the red portion
underneath,
Notes
© You cannot set VCR Plus+ in
the following cases:
—- When the VCR is turned
off.
~ While recording using the
timer or quick timer.
® The timer will not accept
settings in the following
cases:
- When you select DAILY
for a Saturday and Sunday
program.
- When you select DAILY or
WEEKLY for a program
more than seven days
ahead.
~ When you enter the
PlusCode of a program
that has already ended.
ofan Pea coer tte
a
es
>
Press
TIMER
REC
ON/OFF
to
turn
the VCR off.
The TIMER indicator on the VCR lights
up and the VCR stands by for recording.
When using a cable box, leave it on.
The VCR automatically turns on,
records the program and turns off.
$e
To stop recording
To
stop
while
the
VCR
is
recording
a
program,
press
TIMER
REC
ON/
OFF
to
turn
off
the
TIMER
indicator
on
the
VCR.
To use the VCR while recording
You
can
do
the
following
tasks
while
recording
using
VCR
Plus+.
a
To
Press
Reset
the
counter
to
“OHOOM00S”
COUNTER
RESET
Display
tape
information
on
the
DISPLAY
TV screen
Check
the
timer
settings
MENU
and
select
TIMER
SET/CHECK
Watch
another
TV
program
TV/VTR
(See
“Watching
a
TV
program
while recording another” on page 39.)
Using
the
VCR
before
recording
begins
Press
TIMER
REC
ON/OFF
to
turn
off
the
TIMER
indicator
on
the
VCR,
then
press
POWER.
The
VCR
is
ready
for
use.
After
using
the
VCR,
press
TIMER
REC
ON/OFF
again
to
turn
on
the
TIMER
indicator
on
the
VCR.
When
using
a
cable
box,
leave
it
on.
Remember
to
reset
the
VCR
to
stand
by
for
recording
before
the
time
you've
set
it
to
start
recording,
or
the
timer
setting
will
be
cancelled.
Basic Operations | 45