Sony HCD-441 - Dubbing Tapes (from Deck A to B); Loading Tapes for Dubbing; Activating High Speed Dubbing; Starting Tape Dubbing

Dubbing Tapes (from Deck A to B)
This section describes about the operation of the recording from deck A to B.
SYSTEM POWER
—» ON
=e sa
en eee eee [ie 2)
eee
1 Press & to open the cassette compartments,
insert the tapes with the sides to be played
back or recorded facing you and close the
cassette compartments.
Recorded tape
Blank tape
Press HIGH SPEED DUBBING.
The unit enters recording pause mode for high speed
dubbing, the 18 and @ indicators light.
(Dubbing can not be carried out without pressing
HIGH SPEED DUBBING.)
HIGH SPEED
| DUBBING
NO
-O
41
3 Press fl to start dubbing.
The recording pause mode will be canceled and
dubbing starts.
The UU indicator goes off.
PAUSE
3°
To stop dubbing, press IB on deck A or B.
Notes
* The tape in deck B is automatically recorded with the same
recording system as the original tape in deck A. So it is
unnecessary to set DOLBY NR.
* If the sound is affected by a television set during dubbing,
turn off the set or move it away from the unit.
15