Sony HCD-441 - Playing in a Desired Order - Program Play; Loading Discs for Programming; Activating Program Mode; Programming Disc Order

Playing in a Desired Order - Program Play
‘ou can make a program by designating up to 32 steps in the order you want them to be
layed. The unit will play the disc according to your program.
his function is very convenient for recording on the cassette tape.
3-a To program discs in the order you want
to play.
Press DISC SELECT 1 - 5 in the order you
want to program.
DISC SELECT
"AL" appears in the display.
3-8 To program selections on a disc in the
order you want to play.
1) Select the desired disc with DISC SELECT
ee Sere
1 Place discs with the label side up.
After placing discs, press & to close the disc table.
2) Press <<) or DDI repeatedly until the
desired selection is located.
ES
tet | 1
Total program time
2 Press PROGRAM so that “PROGRAM”
appears on the display.
PROGRAM
Selection to be
programed
3) Press PROGRAM.
PROGRAM
Y2seas
= m
The selection is stored, and the blinking number in
the display light up.
Repeat 2) and 3) to select another selection.
To program the selection(s) on another disc, repeat
1), 2) and 3).