Sony HCD-441 - Setting the Super WOOFET; Operating SA-W441;SA-W442; Selecting the Level Meter

Setting the Super Woofer
Operating SA-W441/SA-W442
POWER indicator Power level meters PHASE indicator After turning on the unit by pressing SYSTEM POWER,
press SUPER WOOFER on HCD-441 or SUPER WOOFER
ON/OFF on the remote commander to on.
Selecting the Level Meter
The level meters show the power output level of the left
channel and right channel independently.
You can turn off and on the level meters by pressing the
LEVEL METER.
Adjusting the Phase
The phase polarity is normal when the PHASE indicator is
not lit. However, depending on the speakers combined with
this unit and its installation position, the reverse setting may
sometimes provide a better bass reproduction. Please select
the setting which provides the bass reproduction that suits
your preference by pressing PHASE on the remote
commander while listening to the sound in your listening
position.
For personal listening
SUPER WOOFER Sm = Connect headphone to the HEADPHONES jack. No sound
ON/OFF
—)
W.
is
heard
from
the
speakers.
Notes
¢ The super woofer is automatically turned off in the
PHONO mode and it can not be controlled.
* Place the super woofer directly on the floor.
If your floor is made of wood, to obtain high-quality bass
sound, we recommend that you attach the supplied feet to
the bottom corners of the super woofer for greater
stability.