To Next PageTo Next Page
Need help?Do you have a question about the Sony HCD-TB10 and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| Bluetooth | No |
| USB Playback | No |
| Outputs | Headphone jack |
| Tuner Bands | AM/FM |
| Speakers | 2 |
| Inputs | Auxiliary Input |
| Type | Mini Hi-Fi System |
Instructions for safely handling the optical pick-up block and its flexible board during service.
Guidelines for safely checking the laser diode emission, including safe distance and precautions.
Identifies buttons on the remote control and unit, with page references for their functions.
Step-by-step instructions for removing the side panels.
Instructions for removing the top panel of the unit.
Procedure for removing the cassette mechanism deck.
Instructions for removing the front panel assembly.
Procedure for removing the H/P and PANEL circuit boards.
Instructions for removing the LCD and Back Light circuit boards.
Procedure for removing the VOL circuit board.
Instructions for removing the SUB TRANSFORMER board and back panel.
Procedure for removing the MAIN circuit board.
Instructions for removing the CDM board and CD mechanism deck.
Procedure for removing the Power Transformer and P-AMP boards.
Step-by-step instructions for disassembling the CD mechanism cam.
Procedure for removing the MOTOR (TRAY) circuit board.
Instructions for removing the Holder (BU) assembly.
Procedure for removing the MOTOR circuit board.
Procedure to switch AM channels between 9 kHz and 10 kHz steps.
Moves the pickup to a position durable to vibration, used for shipping or returning the unit.
Locks the CD tray and disc in place, even after power-off, for protection.
Resets all data, including presets, to initial conditions, used when returning the set to customer.
Displays the unit's model version, destination, and date of manufacture.
Tests all LCD segments and LEDs, and performs keyboard checks.
Used to test the function of the audio equalizer by cycling through settings.
Allows free movement of the CD sled motor for cleaning or testing.
Procedure for adjusting the AM Intermediate Frequency (IF) using a signal generator and level meter.
Method for adjusting FM tuned level by monitoring voltage at a specific IC pin.
Procedure to adjust the FM null point by setting a specific voltage between IC pins.
Procedure to check the RF signal level from the CD player's optical pick-up using an oscilloscope.
Diagrams showing the physical placement of all major circuit boards within the unit.
High-level block diagrams illustrating the system's functional interconnections.
Component layout diagram for the MAIN printed wiring board.
Part 1 of the MAIN section schematic diagram, detailing circuit connections.
Part 2 of the MAIN section schematic diagram, detailing circuit connections.
Part 3 of the MAIN section schematic diagram, detailing circuit connections.
Part 4 of the MAIN section schematic diagram, detailing circuit connections.
Schematic diagram for the PANEL section, showing its circuit connections.
Component layout diagram for the PANEL printed wiring board.
Component layout diagram for the LCD printed wiring board.
Schematic diagram covering the Amplifier and Power supply sections.
Component layout diagram for the Amplifier printed wiring board.
Component layout diagrams for the Power Transformer and Sub Transformer boards.
Schematic diagram for the CD player section, detailing its circuitry.
Component layout diagram for the CD player printed wiring board.
Component layout diagrams for the Motor and Motor (Tray) boards.
Details the pin functions for specific integrated circuits used in the unit.
Exploded view showing parts and assembly for the side and back panels.
Exploded view illustrating the parts and assembly of the front panel.
Exploded view detailing the components and assembly of the main chassis.
Exploded view showing the parts and assembly of the CD mechanism deck.
