Sony ILCE-9 - Spot Metering Point

C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2017/03/15 14:08
ILCE-9
4-692-676-11 (2)
GB
109
Shooting
Note
• [Metering Mode] is locked to [Multi] in the following shooting modes:
– [Intelligent Auto]
– Other zoom functions than the optical zoom
• In [Highlight] mode, the subject may be dark if a brighter part exists on the
screen.
Spot Metering Point
Sets whether to coordinate the spot metering position with the focus area
when [Focus Area] is set to [Flexible Spot] or [Expand Flexible Spot].
MENU  (Camera Settings 1)  [Spot Metering Point] 
desired setting.
Center: The spot metering position does not coordinate with the focus
area, but always meters brightness at the center.
Focus Point Link: The spot metering position coordinates with the focus
area.
Note
• When [Focus Area] is set to other than [Flexible Spot] or
[Expand Flexible Spot], the spot metering position is locked to the center.
• When [Focus Area] is set to [Lock-on AF: Flexible Spot] or
[Lock-on AF: Expand Flexible Spot], the spot metering position coordinates to
the Lock-on AF start position, but does not coordinate with the tracking of the
subject.