ILCE-9
4-692-676-11 (2)
C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\060SET.indd
2017/03/15 14:08
GB
182
Camera settings
Pwr Save Start Time
Sets time intervals to automatically switch to power save mode when you
are not performing operations to prevent wearing down the battery pack.
To return to shooting mode, perform an operation such as pressing the
shutter button halfway down.
MENU (Setup) [Pwr Save Start Time] desired setting.
30 Min/5 Min/2 Min/1 Min/10 Sec
Note
• Turn off the product when you do not use it for a long time.
• The power save function is not activated when power is being supplied
via USB, when playing back slideshows, when recording movies, or when
connected to a computer or TV.
Remote Ctrl
You can operate this product and shoot images using the SHUTTER
button, 2SEC button (2 second delay shutter), and START/STOP button
(or Movie button (RMT-DSLR2 only)) on the Wireless Remote Commander
RMT-DSLR1 (sold separately) and RMT-DSLR2 (sold separately). Refer also
to the operating instructions for the Wireless Remote Commander.
MENU (Setup) [Remote Ctrl] desired setting.
On: Allows remote commander operation.
Off: Does not allow remote commander operation.
To Next Page
Loading...
