C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\060SET.indd
2017/03/15 14:08
ILCE-9
4-692-676-11 (2)
GB
187
Customizing the camera
USB Power Supply
Sets whether to supply power via the micro USB cable when the product is
connected to a computer or an USB device.
MENU (Setup) [USB Power Supply] desired setting.
On: Power is supplied to the product via a micro USB cable when the
product is connected to a computer, etc.
Off: Power is not supplied to the product via a micro USB cable when the
product is connected to a computer, etc. If you use the supplied AC
Adaptor, power will be supplied even when [Off] is selected.
Note
• Insert the battery pack into the product to supply power via USB cable.
PC Remote Settings
Still Img. Save Dest.
Sets whether to save still images stored in both the camera and the
computer during PC Remote shooting. This setting is useful when you
want to check recorded images on the camera without leaving the
camera.
* PC Remote: Uses “Remote Camera Control” (page204) to control this
product from the computer, including such functions as shooting and storing
images on the computer.
MENU (Setup) [PC Remote Settings]
[Still Img. Save Dest.] desired setting.
PC Only: Saves still images only on the computer.
PC + Camera: Saves still images on the computer and the camera.
To Next Page
Loading...
