ILCE-9
4-692-676-11 (2)
C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\060SET.indd
2017/03/15 14:08
GB
174
Checking images before/after recording
Auto Review
You can check the recorded image on the screen right after the shooting.
You can also set the display time for Auto Review.
MENU (Camera Settings 2) [Auto Review] desired
setting.
10 Sec/5 Sec/2 Sec: Displays the recorded image on the screen right after
shooting for the selected duration of time. If you perform a magnifying
operation during Auto Review, you can check that image using the
magnified scale.
Off: Does not display the Auto Review.
Note
• When you use a function that performs image processing, the image before
processing may be displayed temporarily, followed by the image after
processing.
• The DISP (Display Setting) settings are applied for the Auto Review display
(page35).
Aperture Preview
While you press and hold the key to which you assigned the
[Aperture Preview] function, the aperture is stepped down to the set
aperture value and you can check the blurriness prior to shooting.
1
MENU (Camera Settings 2) [Custom Key (Shoot.)]
set the [Aperture Preview] function to the desired key.
2
Confirm the image by pressing the key to which
[Aperture Preview] was assigned.
To Next Page
