C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2017/03/15 14:08
ILCE-9
4-692-676-11 (2)
GB
121
Shooting
Note
• [White Balance] is fixed to [Auto] in the following shooting modes:
– [Intelligent Auto]
• If you use a mercury lamp or a sodium lamp as a light source, the accurate
white balance will not be obtained because of the characteristics of the light.
It is recommended to shoot images using a flash or select [Custom Setup].
Capturing a basic white color in [Custom Setup] mode
In a scene where the ambient light consists of multiple types of light
sources, it is recommended to use the custom white balance in order to
accurately reproduce the whiteness. You can register 3 settings.
1
MENU (Camera Settings 1) [White Balance]
[Custom Setup].
2
Hold the product so that the white area fully covers the circle
located in the center of the screen, and then press the center of
the control wheel.
After the shutter sound beeps, the calibrated values (Color Temperature
and Color Filter) are displayed.
3
Select a registration number using the left/right sides of the
control wheel, and then press the center.
The monitor returns to the recording information display while
retaining the memorized custom white balance setting.
• The registered custom white balance setting will remain memorized
until overwritten by another setting.
To Next Page
Loading...
