NEX-3/3C
-
• When the access lamp is lit,
do
not remove the memory card or the battery pack, or
tum off the power. The data may be corrupted.
Attaching the flash
When
you
want
to use a flash during shooting, attach
the
flash device
(supplied).
The
flash is enabled when it is raised, and disabled when lowered.
1
Attach
the
flash
to
the
Smart
Accessory
Terminal
of
the
camera.
•
When
using the E18 - 200
mm
lens,
you must attach the extender
(page 24).
2
Fasten
the
screw
to
secure
the
flash.
3
To
fire
the
flash,
raise
the
fl
as
h
fi
rst.
•
Lower
the flash when you do not
intend to use it.
GB
23
To Next Page
Loading...
