Setting the Status Display on the Viewfinder Screen and the LCD Monitor
150
Chapter 6 Menu Displays and Detailed Settings
For details on menu operations, see “Basic
menu operations” on page 140.
2 Select the desired item, and press the
MENU knob.
You can set the following items on the
MARKER 1 and MARKER 2 pages.
MARKER 1 page
a) The ASPECT MASK setting affects the
viewfinder and LCD monitor display. In the
following cases, it also affects the VBS signal.
• When TEST OUT SELECT on the OUTPUT 1
page is set to VBS.
• When both TEST OUT SUPER on the
OUTPUT 1 page and SUPER(MARKER) on
the SUPER IMPOSE page are set to ON.
MARKER 2 page
3 Turn the MENU knob to change the
setting, and press the MENU knob.
4 Repeat steps 2 and 3 until you have set
all of the desired items.
You can make settings for viewfinder screen
display functions.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1 Display the VF SETTING page of the
OPERATION menu on the screen, and
press the MENU knob.
For details on menu operations, see “Basic
menu operations” on page 140.
Item Description
MARKER To hide all markers,
set to “OFF”.
CENTER To display the center
marker, set to “ON”.
CENTER MARK Selects the position of
the center marker.
SAFETY ZONE To display the safety
zone, set to “ON”.
SAFETY AREA Selects the safety zone
range (80%, 90%,
92.5% or 95%).
ASPECT To display the aspect
marker, set to “ON”.
ASPECT SELECT Selects the aspect
mode (15:9/14:9/13:9/
4:3/1.85/2.35).
ASPECT MASK
a)
To make the areas out
of the selected aspect
marker dimmer, set to
“ON”.
ASPECT MASK LVL To set the mask level,
when the ASPECT
MASK is set to “ON”.
100 % MARKER To display the
effective pixel area,
set to “ON”.
Item Description
USER BOX Turns the display of
the box cursor on and
off.
USER BOX WIDTH Sets the width of the
box cursor (distance
from center to left or
right edge).
USER BOX HEIGHT Sets the height of the
box cursor (distance
from center to top or
bottom edge).
USER BOX H POS Sets the horizontal
position of the center
of the box cursor.
USER BOX V POS Sets the vertical
position of the center
of the box cursor.
CENTER H POS Sets the horizontal
position of the center
marker.
CENTER V POS Sets the vertical
position of the center
marker.
ASPECT SAFE
ZONE
Turns the display of
the aspect safety zone
on and off.
ASPECT SAFE
AREA
Selects the range of
the aspect safety zone
(80%/90%/92.5%/
95%).
Setting the viewfinder
To Next Page
