Setup Menu List
61
Menu Configuration and Detailed Settings
Properties
Execute / Cancel
Select [Execute] to display the detailed information of the
planning metadata loaded in the recorder.
[File Name]: Filename
[Assign ID]: Assignment ID
[Created]: Time and date of creation
[Modified]: Time and date of most recent modification
[Modified by]: Name of person who modified the file
[Title1]: Title1 specified in file (clip name in ASCII format)
[Title2]: Title2 specified in file (clip name in UTF-8 format)
[Material Gp]: Number of material groups (groups of clips
recorded using the same planning metadata)
[Shot Mark1]: Name defined for Shot Mark 1
[Shot Mark2]: Name defined for Shot Mark 2
When you select [File Name], [Assign ID], [Title1], or
[Title2] on the Planning Metadata Properties screen and then
press the SEL/SET button, the selected item is displayed on
the full screen, permitting you to check a long file or clip
name at a glance.
Note
Names of shot marks cannot be displayed on the full screen
even if you select [Shot Mark1] or [Shot Mark2].
Clear
Execute / Cancel
Select [Execute] to clear the planning metadata loaded in the
recorder.
Clip Name Disp
Title1 (ASCII) / Title2 (UTF-8)
Select the display mode of the clip name specified in planning
metadata.
Note
When both an ASCII format name and a UTF-8 format name
are specified in planning metadata, the UTF-8 format string is
used as the clip name. If only either ASCII-format name or
UTF-8 format name is specified in planning metadata, the
specified name is displayed regardless of the menu setting.
Power Enable
Setting specifying
the connector that
supplies power to
external equipment
Sony Wireless Adapter / USB A Set the connector that supplies power to external equipment.
[Sony Wireless Adapter]: Supply power from the DC OUT
connector (for CBK-WA100).
[USB A]: Supply power from the USB (HOST) connector.
Network
Setting for
network
connections
Note
IFU-WLM3 is
required.
DHCP
Enable / Disable
Select whether to acquire the IP address automatically from a
DHCP server ([Enable]) or not ([Disable]).
IP Address
0.0.0.0 to 255.255.255.255
(192.168.1.10)
Set the IP address when [DHCP] is set to [Disable].
Subnet Mask
0.0.0.0 to 255.255.255.255
(255.255.255.0)
Set the subnet mask when [DHCP] is set to [Disable].
Default Gateway
0.0.0.0 to 255.255.255.255
(0.0.0.0)
Set the default gateway when [DHCP] is set to [Disable].
User Name
(admin)
Set a desired user name in 1 to 31 alphanumeric characters.
OTHERS
Menu items Subitems and setting values Contents
To Next Page
Loading...
