Clip Operations
36
Playback
During thumbnail screen playback, etc., you can
operate the clips or confirm and change the
subsidiary data for clips using the Clip Operation
menus.
The corresponding Clip Operation menu pops up
on the screens as shown below when you press
the SET/SEL button.
Note
Selectable menu items are limited in SD Mode.
Select a menu item, then press the SEL/SET
button. Pressing the CANCEL button restores the
previous condition.
Selecting [CANCEL] from a Clip Operation
menu turns the Clip Operation menu off.
Notes
• When the SxS memory card is write-protected, some
operations are unavailable.
• There may be items that cannot be selected depending
on the status when the menu is displayed.
Clip Operations
Clip Operation Menus
Thumbnail screen (page 37)
CANCEL
DISP CLIP INFO
OK MARK ADD (FAT only)
OK MARK DELETE (FAT only)
OK FLAG ADD (UDF and exFAT)
NG FLAG ADD (UDF and exFAT)
KEEP FLAG ADD (UDF and exFAT)
CLIP FLAG DELETE (UDF and exFAT)
LOCK CLIP (UDF and exFAT)
UNLOCK CLIP (UDF and exFAT)
COPY CLIP(A)
COPY CLIP(B)
COPY CLIP(USB)
DELETE CLIP
ALL MARKS
SHOT MARK1
SHOT MARK2
REC START MARK (UDF and exFAT)
EXPAND CLIP
CLIP REPEAT
PARTIAL PLAYBACK
P-PLAY & SDI REC
Expand Clip screen (page 40)
CANCEL
EXPAND(COARSE)
EXPAND(FINE)
PAUSE
SET INDEX PIC
SHOT MARK1 ADD
SHOT MARK2 ADD
SHOT MARK1 DEL
SHOT MARK2 DEL
DIVIDE CLIP (FAT only)
CLIP REPEAT
Shot Mark screen (page 41)
CANCEL
PAUSE
SET INDEX PIC
SHOT MARK1 DEL
SHOT MARK2 DEL
DIVIDE CLIP (FAT only)
CLIP REPEAT
TRIM SHOT MARK1
TRIM SHOT MARK2
EXPAND(FINEST)
Basic Operations of the Clip
Operation Menus
To Next Page
Loading...
