Troubleshooting
86
Appendices
Unknown Media(A)
2)
Please Change
A partitioned memory card or one that contains recorded clips
exceeding the number permitted with this recorder is loaded.
This card cannot be used with this recorder. Remove it and
load a compatible card.
Media Error
Media(A)
2)
Needs to be
Restored
An error occurred with the memory card. The card requires
restoration.
Remove the card, load it again, and restore it.
Media Error
Cannot Record to
Media(A)
2)
Recording cannot be done, as the memory card is defective.
As playback may be possible, it is recommended to replace it
with another card after copying the clips, as required.
Media Error
Cannot Use Media(A)
2)
Neither recording nor playback can be done, as the memory
card is defective.
It cannot be operated with this recorder. Replace it with
another card.
Will Switch Slots Soon This is an advanced notice that the recorder will switch from
the current memory card to the other memory card for
continuous recording.
No Clip There are no clips on the media.
Check the selected card.
Cannot Use Media(A)
3)
Unsupported File System
A media of a different file system or an unformatted media
was inserted. It cannot be used with this recorder.
Replace it with another card or format it with this recorder.
In This File System
Cannot Use Media(A)
2)
A memory card that is not compatible with the current file
system is inserted.
Replace the card from the respective slot, format it with the
recorder, or switch the F.Sys. mode.
Same File Already Exists
Change Media(A)
3)
A clip with the same name exists on the media to which you
want to copy.
Replace the media with different media.
Video Format Mismatch The external signal input via the i.LINK connection cannot be
recorded, as the [Rec Format] setting is different from the
signal format of the external input signal.
Change [Rec Format] in [System] in the [OTHERS] menu to
match it to that of the external signal.
Copy Protected Input
Cannot Record
The external signal input via the i.LINK connection cannot be
recorded, as the stream is copy-protected.
Check the input signal.
Media Error
Playback Halted
An error occurred in reading data from the memory card, and
playback cannot be continued.
If this frequently occurs, change the memory card after
copying the clips, as required.
Media(A)
2)
Error
Recording cannot be done, as an error occurred with the
memory card.
If this frequently occurs, change the memory card.
Media Reached
Rewriting Limit
Change Media(A)
2)
The memory card comes to the end of its service life. Make a
backup copy and replace the card with another one as soon as
possible. Recording/playback may not be performed properly
if you continue to use the card.
Reached Clip Number
Limit
Copy Completed to xx/xx
The maximum number of clips for the media is reached, so
copying cannot continue. (xx/xx indicates the completed copy
operations.)
Replace the media.
Warning indication
on LCD
Buzzer Ta l l y
lamps
Cause and measures
To Next Page
Loading...
