To
perform pairing
1 Place the S-AIR sub unit that
you want to pair near the S-AIR
main unit.
2 Match the IDs of the S-AIR main
unit and the S-AIR sub unit.
•
To
set the ID
of
the
S-AIR
main unit.
see
"To
set the ID
of
the S-AIR main
unit" (page 61).
• To set the ID
of
the S-AIR sub unit.
refer to the operating instructions
supplied with the S-AIR sub unit.
3 Press AMP MENU.
4 Press +,+ repeatedly to select
"S-AIR", then press
8 or
+.
5 Press +,+ repeatedly to select
"PAIRING", then press
8 or +.
6 Press +,+ repeatedly to select
the setting you want, then
press
8.
• START: The S-AIR main unit starts
pairing.
"SEARCH"
nashes
on the
display.
• STATUS: You can check the current
ID. When the pairing setting
is
not
made, "'NO PAIR" appears on the
display.
7 Start pairing of the S-AIR sub
unit.
• For the surround amplifier
Refer to the operating instructions
supplied with the surround amplifier.
• For the S-AIR receiver
Refer to the operating instructions
supplied with the S-AIR receiver.
8 Pairing completed.
"COMPLETE"
appears on the display.
To exit the menu
Press
AMP
MENU.
Note
Perform the pairing within several minutes after step
6.
Otherwise. the pairing
is
canceled automatically
and "ERROR" appears
on
the display.
To cancel pairing
Reset the
ID
of
the
S-AIR
main unit.
For
details. see "'To set the ID
of
the S-AIR
main unit" (page 61). You can select the same
ID as before.
63
GB
-
(J)
I
»
::D
o
"C
~
""lI
l»
=:
o
::J
til
To Next Page
Loading...
