•
FRTCRS.
Lets you set the bass crossover frequency
of
the front speakers that have been set to
"SMALL" in the SPEAKER menu.
•
CNTCRS.
Lets you set the bass crossover frequency
of
the center speaker that have been set to
"SMALL" in the SPEAKER menu.
• SUR CRS.
Lets you set the bass crossover frequency
of
the surround speakers that have been set to
"SMALL" in the SPEAKER menu.
•
FH
CRS.
Lets you set the bass crossover frequency
of
the front high speakers that have been set to
"SMALL" in the SPEAKER menu.
You can select the sound field you want for
your listening pleasure.
•
S.F.
SELCT
Lets you select the sound field you want. For
details, see "Enjoying Surround Sound" (page
50).
Note
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example,
if
you select "HALL" for the
DVD input, then change to a different input and then
return to DVD,
"HALL"
will automatically be
applied again.
• EFFECT
Lets you adjust the "presence"
of
the surround
effect for the Cinema Studio
EX
AlB/C
sound
fields.
80
GB
You can adjust the tonal quality (bass/treble
level)
of
the front speakers.
• BASS
• TREBLE
Note
This function does not work in the following cases.
- Signals with a sampling frequency
of
more than
48 kHz are being received.
- Analog Direct
is
selected.
Tip
You can also adjust the front speaker bass and treble
level with
TONE
MODE and TONE
+/-
on the
receiver (page 7).
You can set the FM station receiving mode and
name the preset stations.
•
FM
MODE
• STEREO
This receiver will decode the signal as stereo
signal when the radio station
is
broadcast in
stereo.
• MONO
This receiver will decode the signal as mono
signal regardless
of
the
broadcast signal.
• NAME
IN
Lets you set the name
of
preset stations. For
details, see "Naming preset stations" (page
48).
To Next Page
Loading...
