• S-AIR (Sony Audio Interactive
Radio frequency)
Recent times have seen the rapid spread
of
DVD media, Digital Broadcasting, and other
high quality media.
To ensure that the subtle nuances
of
these high
quality media are transmitted with no
deterioration, Sony has developed a
technology called "S-AIR" for the radio
transmission
of
digital audio signals with no
compression, and has incorporated this
technology into the EZW-RT
1O/EZW-T100.
This technology transfers digital audio signals
with no compression using the 2.4 GHz band
range
of
ISM band (Industrial, Scientific, and
Medical band), such as wireless LANs and
Bluetooth applications.
• Sampling frequency
To convert analog audio to digital, analog data
should be quantified. This process is called
sampling, and the number
of
times per second
the analog data is quantified
is
called the
sampling frequency. A standard music CD
stores data quantified at 44,100 times per
second, which is expressed as a sampling
frequency
of
44.1 kHz. Generally speaking, a
higher samplingfrequency means better sound
quality.
• x.v.Color (x.v.Colour)
x.v.Color (x.v.Colour)
is
a more familiar term
for the xvYCC standard proposed by Sony,
and is a trademark
of
Sony. xvYCC
is
an
international standard for color space in video.
This standard can express a wider colour range
than the currently used broadcast standard.
88
GB
Precautions
On safety
Should any solid object or liquid fall into the
cabinet, unplug the receiver and have it
checked by qualified personnel before
operating it any further.
On power sources
• Before operating the receiver, check that the
operating voltage is identical with your local
power supply.
The operating voltage is indicated on the
nameplate on the back
of
the receiver.
• The unit is not disconnected from the
AC
power source (mains) as long as it is
connected to the wall outlet, even
if
the unit
itself has been turned off.
•
If
you are not going to use the receiver for a
long time, be sure to disconnect the receiver
from the wall outlet.
To
disconnect the
AC
power cord (mains lead), grasp the plug
itself; never pull the cord.
• The
AC
power cord (mains lead) must be
changed only at a qualified service shop.
• (Models
of
area code U2, CA2 only)
One blade
of
the plug is wider than the other
for the purpose
of
safety and will fit into the
wall outlet only one way.
If
you are unable to
insert the plug fully into the outlet, contact
your dealer.
On heat buildup
Although the receiver heats up during
operation, this is not a malfunction.
If
you
continuously use this receiver at a large
volume, the cabinet temperature
of
the top,
side and bottom rises considerably. To avoid
burning yourself, do not touch the cabinet.
To Next Page
Loading...
