80 Service manual
5. S2terminal and service commands CRANEX
®
Novus e
8. Key in "help" and press ENTER.
_________________________________________________________________
help
_________________________________________________________________
A list of commands will appear.
NOTE:
The list may vary according to unit version
-------------------------------------------------------------------------------------------------------------
CMD DESCRIPTION (* available also in normal mode)
calib calibrates generator references and preheat
conf display summary of confi guration data
confccd display summary of CCD confi guration data
dap dose area product calibration value [<value>]
dc takes dark current image
demo enter demo mode
display display power level (<value>)
endu endurance test, drives rotating unit 75 rounds
exitdemo exit demo mode
exp exposure (<time>) in milliseconds, default is 1000
expcnt exposure counter, use [<clear>] option to clear it
help display info on command (‘help [cmd]’ or ‘h [cmd]’)
imagecalib takes a calibration image for calibrating the DSD
ip confi gure ip address
kVcheck test kV/mA combinations
log
service log [<all> <clear> <newest> <statistics>]
logsign make a service signature for current events
mac print mac address
maincalib calibrates main voltage high and low limits
parameters: <current voltage>
mainsprint print current mains voltage value
motortest run exposure ramp
optotest prints optosensor values until user types 'q' on keyboard
patt generates test pattern from CCD module
printgen prints the generator settings
quit quit service terminal
reset reboot the unit
restore restore factory confi guration
serno print unit serial number
setserno confi gure serial number (and MAC accordingly)
stillmode still image exposure mode
warmup tubehead warmup before fi rst use
-------------------------------------------------------------------------------------------------------------
_________________________________________________________________
>
_________________________________________________________________
To Next Page
Loading...
