EasyManuals Logo

Sound Devices 833 User Manual

Sound Devices 833
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Auto (A20-RX only)
Starts scanning for clean frequencies to auto-assign to receiver channels. Use the Tone toggle to start the process. When the
auto-assign scan is complete, the AutoAssign screen is displayed. Use the Select knob to select which receiver channels to assign
the clean frequencies to. A selected channel displays the clean frequency that will be assigned. Press the HP knob to assign the
clean frequencies to the selected channels.
RF Scan
Instigates an RF Scan of the environment using one or both receivers depending on the receiver model. Use the */** toggle switch to
start the scan.
Options
Access the SL-2 Options menu by using the Rtn/Fav toggle switch.
833 User Guide 56

Other manuals for Sound Devices 833

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sound Devices 833 and is the answer not in the manual?

Sound Devices 833 Specifications

General IconGeneral
Number of Channels8
Mic Inputs6
Main Outputs2
Aux Outputs4
Headphone Output1
Bit Depth24-bit
TimecodeYes
Dynamic Range120 dB
Microphone Preamps6
Analog Outputs4
TypePortable Mixer-Recorder
Line Inputs6
AES Inputs2
Sampling Rateup to 192 kHz
Recording MediaSD, SDHC, SDXC
PowerBattery or External DC
Frequency Response10 Hz to 80 kHz
THD+N0.005%
Digital Outputs2

Related product manuals