Page. 61 of 87
The USB port installation and its setting is now complete.
Now that this fundamental step has been successfully completed, the application
KTerm_USB.exe remote control application can be launched.
For this purpose a back-step to the starting uncompressed folder KTerm_Package_1_0
must be performed and double-click on the application filename, as indicated in the
picture below
Note: Do not forget that KTerm_USB.exe requires full accessibility to the ftd2xx.dll application
extension. So, in case the application itself gets copied into another work folder, please
correct that action.
A good practice is to copy both KTerm_USB.exe and ftd2xx.dll into the same work
folder.
To Next Page
