INDEX Page. 74 of 92
A dialog window will pop up:
Press the Acquire ID string key, marked in the picture above, in order to start the ID
string characters acquisition process across the USB data-link.
This is a guided self-learning procedure.
In case more than one USB communications is linked to the system, directly or indirectly
thru an external USB hub, the following notification pop-up window will be shown:
In such a case the user should disconnect all other devices except the EXPERT amplifier
and to retry again using the acquisition procedure above described.
In case the user detaches all of the connected devices, including the linear amplifier, the
Term_1.5K_USB.exe acquisition system will notify the user by showing the following self-
explaining pop-up message.
To Next Page
