Specialized LEVO 2022 - Page 38

1
2
3
SRAM UNIVERSAL DERAILLEUR HANGER
# PART NAME PART NUMBER QTY SPEC TOOL
TORQUE
COMMENT
Nm in-lbf
SRAM Universal Derailler Hanger S202600002 1 8 mm hex 25 221
WARNING! Correct grease application is critical to rider safety. ONLY apply grease as instructed.
INSTALLATION PROCESS:
 1: Install the UDH hanger assembly into the frame dropout.
 2: Rotate the UDH hanger forward until it is completely seated in the hanger pocket or contacts the rotational stop tab.
Apply grease ONLY to the thru-axle threads. Do NOT apply grease to the frame, UDH hanger, or UDH bolt threads.
The hanger must be completely seated in the hanger pocket or against the frame stop tab when tightened to the specified
torque.
 3: Install the UDH washer, then thread the UDH bolt through the washer and into the hanger.
 Torque the bolt to specification.The UDH hanger bolt is left-hand threaded.
A reversible (left-hand and right-hand thread) torque wrench MUST be used to ensure proper left-hand thread bolt torque.
PAGE
36
2022
TECHNICAL GUIDE