Indicates that sequencing mode is enabled.
Displays the current date and time.
Remote control ID display. If a remote ID is not set, the message “ALL” is
displayed.
Displays the amount of recording on the hard disk from 0-99%.
Indicates that HDD is recycled.
Continuous recording in progress.
Manual recording in progress. To set the Manual recording mode, press the
Record button on the front panel.
Motion alarm recording in progress.
Sensor recording in progress.
Right click the mouse, and the quick operation window will be displayed as below.
Figure 5.1.2. Quick Operation Window
Table 5.1.2. Menu Items in Quick Operation Window
Search button. Click this button to enter the search menu.
Select this option to enter the Setup menu.
Select between different multi-view display formats.
Capture pictures and store as BMP files
To Next Page
Loading...
