Operation
— 22 SPECTROLAB — 30.07.2015
6.4 Measuring procedure
Caution! Caution! Risk of crushing hands!
Springs are used to keep the sample clamp in position. However, the clamp
may fold down unexpectedly. If your hand is caught underneath the clamp,
this may cause injuries.
Never place your hand under the sample clamp.
Caution! Risk of electric shock!
The sample clamp provides the contact between the sample and the Plasma
generator. There is a risk of suffering an electric shock when handling the
sample clamp.
Never tamper with the sample clamp.
Caution! Risk of burns!
A sample can get hot if it is measured several times.
Touch the sample only after is has sufficiently cooled.
Caution! Risk due to UV radiation!
The arc on the spark stand generates UV radiation. UV radiation may cause
damage to the eyes or skin.
Use the appropriate sample adapter for samples that are not completely
covered by the spark stand opening.
Take appropriate protective measures (e.g. wear safety goggles) when
the spark stand opening is not fully covered.
Note! Measuring errors may occur!
A flawed initial startup, operation or sample preparation can lead to analytical
measurement errors.
Therefore, ensure all necessary requirements for a correct measurement
are met.
To Next Page
Loading...
