AIRCRAFT TYPE (MULTIROTOR)
Selecting Multirotor for the model type
during a new model setup will enable the
multirotor Aircraft Type menu. This menu
defines the number of rotors and camera
mount axes and can be optimized for
racing drones or aerial photography. The
AP mode has advanced functions for
aerial photography multirotors to enable
pilots to use a control stick on the iX14+
to fly the multirotor in one flight mode and control the camera from another.
Rotor type: Select the number of rotors on the multirotor.
Camera: Select the number of movement axes on the camera gimbal.
FPV Racer: This selection selects FPV Racer mode or AP mode. When FPV Racer
mode is not enabled, multirotor models are in AP mode.
To Next Page
Loading...
