EasyManuals Logo

SRAM Rockshox Recon Series User Manual

SRAM Rockshox Recon Series
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #92 background imageLoading...
Page #92 background image
92
Lower Leg Installation
Install the rebound adjuster knob onto the rebound damper bottom
bolt.
Press the knob firmly onto the bolt until it clicks into place.
Solo Air / DebonAir: Refer to your pre-service recorded settings, or
use the air chart on the fork's lower leg, and pressurize the air spring.
You may see a drop in the indicated air pressure on the pump gauge
while filling the air spring; this is normal. Continue to fill the air spring to
the recommended air pressure.
Cycling the fork will equalize the positive and negative air chambers.
After the fork is cycled 3-4 times, check the pressure and add air as
needed.
Install the air valve cap.
7
8

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SRAM Rockshox Recon Series and is the answer not in the manual?

SRAM Rockshox Recon Series Specifications

General IconGeneral
BrandSRAM
ModelRockshox Recon Series
CategoryBicycle Accessories
LanguageEnglish

Related product manuals